Breaking News
JSC Volga continues to renovate its own rolling stock

In May this year the first six timber flat-cars with dense timber in the quantity of 336 cubic meters, which were bought by the Volga’s management as a part of the new Company’s strategy, came to the Balakhna Paper Mill from the Oparino railway station.

Earlier JSC Volga used the leased flat-cars.

The new flat-cars manufactured by JSC “Altayvagon” due to their technical and economic characteristics are the most optimal because they have the increased loading capacity. If we compare railway transportation indicators, the models of the flat-cars, purchased by the Volga’s management in April this year to create its own railway rolling stock of the Company and to reduce logistic expenses, have already justified their advantages : the volume of the delivered wood raw material in the new flat-cars has increased by 10% under the equal delivery terms (such as distance, the rate for transportation).

Moreover, according to Irina Ikonnikova, a head of the railway transport workshop, in the near future locomotives TGM 4B 0728 and TGM 4B 0980 will be sent to capital and current repairs, and on the site of railway cars cleaning railway lines, railroad switches and two railway crossings are planned to be repaid.

2018-07-19 
APMS confirms its 5th year of presence with the forthcoming delivery of a PM rebuild for the 2nd leading Spanish packaging manufacturer

San Sebastian (Spain) - APMS - Allimand Paper Machine Spain- subsidiary of ALLIMAND Group, designer and manufacturer of paper and non-woven machines, reinforces its fifth year of presence in Spain with the delivery of a new packaging machine rebuild for the second leading Spanish manufacturer, EUROPAC in Dueñas. And the development objectives of the APMS subsidiary go well beyond the Iberian market.... Let’s take a closer look. Packaging machine rebuild
"The original paper machine of our customer EUROPAC dated back to 1972 ... almost half a century !", says Miguel IBAÑEZ, Director of the APMS subsidiary, with over 30 years of experience in the papermaking industry. "Despite its strong potential, one of the weaknesses was the level of dryness of the press section, which penalized production. After careful study and analysis by the ALLIMAND Group R&D center, machine modifications were proposed to the customer and consisted of a complete rebuild.
Production of better quality paper, combined with a 15% increase in productivity
A complete reconstruction of the machine specialized in white-top and test-liner papers was carried out : the introduction of a new S4 ALLIMAND hydraulic headbox with basis weight control by dilution, a new press section with NAOS shoe press, the modification of the first two dryer groups, the complete modification of the reel and a new unwinding station for the winder.
The modifications proposed to the customer to produce better quality paper will also enable Allimand to increase the speed of the machine. On the one hand this is thanks to the improved dry content at the press section outlet and on the other hand thanks to the increased capacity of parent rolls (2.5mm in diameter) ; and this, in order to follow the new pace of the machine. An increase in productivity of more than 15% is thus expected. "We are going from 700 m/minute to 820 m/minute" says Miguel IBAÑEZ.

The machine was delivered in early June.
…Growth prospects beyond Spain
The presence of this subsidiary in Spain was reinforced in conjunction with the signature of a large order for a Non Woven machine a few years ago. The performance of this machine surpasses the contractual guarantees. The EUROPAC Group has 4 sites in Europe, including two in Spain (Dueñas - Alcolea del Cinca), one in Portugal (Viana do Castelo) and one in France (Papeteries de Rouen).
In the medium term, the objective of the APMS subsidiary is to cover not only the Iberian market but also South-West France and Latin America ... Projects in Mexico and Colombia are already underway... To be continued.

2018-07-19 
Green Investment Group acquires windpower project in Ånge

The Green Investment Group, a specialized green energy investor, has acquired the ongoing windpower project in Överturingen in the municipality of Ånge from SCA and Turinge Energi. The supplier of the 4.2 MW turbines will be Siemens Gamesa.

The windpower project comprises the windparks Storflötten and Länsterhöjden north of Överturingen. The 56 turbines will be distributed over land owned by SCA, Sveaskog and private forest owners. The windparks will be completed by late 2019 or early 2020. The project is managed by a local project organization in Överturingen.

”We have developed this project together with Turinge Energi AB”, says Mikael Källgren, President Renewable Energy. ”We are pleased that the project will now be realised by a strong and committed team of partners. The demand for renewable energy is growing and we are glad to contribute with more green electricity that will be produced on SCA land, in line with our sustainability ambitions.”

Green Investment Group is a specialist green energy investor who, together with their parent company Macquarie Group have supported over 200 green infrastructure projects across the world. GIG also supported the development of and invested in Europe’s largest single-site onshore wind farm at Markbygden outside of Piteå.

Mark Dooley, Global Head of Green Energy for Macquarie Capital and the Green Investment Group said :

“We are delighted to support SCA in the development of this market-leading project, helping establish partnerships involving stakeholders from the landowner to the electricity customer, that were needed to move the project from the development phase into construction. This project is the latest example of SCA’s evolving business model and their sustainability strategy in action, we look forward to continuing our partnership with them.”

2018-07-19 
UPM reduces water use at its paper mills

The paper mills are making significant progress towards closing water circulations, which is the ultimate goal.

The UPM Changshu paper mill in China and the UPM Nordland paper mill in Germany are at the forefront of developing new technologies which aim to reduce water use and cut emissions through an intensive research and development programme.

In Germany, UPM Nordland will improve its wastewater treatment by investing in water purification technology. To be able to reuse treated wastewater in the paper mill process, the mill has to remove organic material and dissolved salts.

“After the treatment, approximately 20% of water can be reused in the first phase, which means that the corresponding amount of fresh water, as well as wastewater sent to the river Ems, can be reduced,” says Klaus Reimann, General Manager of Nordland Papier.

“The purified water also has a higher temperature than fresh water, so we can also reuse thermic energy.”

UPM Nordland Papier is the first fine paper mill to use this technology for recycling wastewater.

Taking good care of a scarce resource in China

In China, the UPM Changshu mill aims to decrease water consumption by 50% per paper tonne. In addition, their wastewater discharge is approaching zero emissions.

“We are currently piloting new solutions and technologies, together with partners, to recycle the water after it is released from the wastewater treatment plant. The treated wastewater will be further reused or combined in order to achieve zero discharge,” explains Corinne Le Ny-Heinonen, Manager, Environmental Support, UPM.

In the paper industry, the main methods of water treatment are a combination of mechanical and biological purification processes. After the first sedimentation stage, the water is cleaned biologically. Then it goes to final sedimentation and—if needed—filtration. The main challenge in the process is to remove dissolved organics, as measured by chemical oxygen demand (COD), from wastewater.

In China, UPM’s paper mill is located along the Yangtze River where COD emission restrictions are much tighter than anywhere else. “We respect and comply with the regulations and keep emissions under the limits. Now we are proactively taking one step further and investing in new technologies to reach our own challenging targets,” she says.

Challenging future targets

UPM has set challenging water-related responsibility targets for 2030, reflecting the Global Sustainable Development Goals (SDGs).
Regarding water, UPM focuses on reducing effluent organic load by 40% and wastewater volume by 30% compared to 2008.

“We also aim to use 100% recycled nutrients at our wastewater treatment plants by 2030. In order to reach our targets, we need to look for and develop new technologies,” says Le Ny-Heinonen.

“Each mill operates somewhat differently and the legislation varies from country to country, but we have to take into account the global impact as well.”

“In the pursuit of minimum water consumption and reaching certain emissions limits, we may come to a point where we have to use more energy or chemicals to reach the targets. These measures will have an environmental impact and increase costs as well. That is why we are looking for tailor-made solutions at each mill.”

“The closer we get to reaching our target, the more difficult the next step will be. However, it is worth continuing our efforts,” Le Ny-Heinonen concludes.

2018-07-18 
Ahlstrom-Munksjö strengthens its market position in the tea and coffee filter market by investing EUR 28 million in its Beverage & Casing business

Ahlstrom-Munksjö reinforces its market position and modernizes its production platform in the Beverage & Casing business by purchasing a secondhand Voith paper making line, to be dismantled and transferred to the Chirnside manufacturing site in the UK. The asset, near state-of-the-art, will be installed on the site where Ahlstrom-Munksjö already has extensive competence and product knowledge in the manufacturing of tea and coffee filter paper and fibrous meat casing materials. The financial benefit of the EUR 28 million investment is attractive and include improved product capabilities, increased manufacturing capacity as well as higher production efficiency. Utilizing existing infrastructure at the site minimizes capital expenditure and shortens the installation period for the investment. The machine is expected to be fully commissioned in the beginning of the fourth quarter of 2019.

The new production line will strengthen product capabilities and, combined with Ahlstrom-Munksjö’s extensive offering of biodegradable and compostable solutions, enables growth in the attractive tea and coffee markets. The investment addresses also the constrained capacity situation in all three segments ; coffee, tea and casing, and enables the company to respond to growing end-use demand.

In the tea bag materials market, where sustainable and plastic free alternatives are driving demand, Ahlstrom-Munksjö has a leading position with its Fiber+ offering, which is a plastic-free and compostable solution made without oil based heat seal fibers. In the single-serve coffee market, the company is a niche supplier with a leading position in the sustainable and compostable segment in Europe and making good progress on the US market.

“The investment shows our long term commitment and our ambition to maintain a leading position in coffee, tea and casing papers. I’m also encouraged that sustainability and plastic-free solutions are in strong demand because it gives us a strategic opportunity to leverage our competence and innovation capability, differentiate our offering of advanced custom-made fiber based materials, and strengthen our relationship with our customers” states Omar Hoek, Executive Vice President of Business Area Specialties.

“This investment will allow us to better serve our existing customers whilst facilitating our growth ambitions. Our UK operations, in particular the Chirnside site, has extensive capabilities in tea, coffee and casing. By maximizing our use of the deep product knowledge and skills we can continue to provide innovative and sustainable products to our customers world-wide” states Stuart Nixon, Vice President of Beverage & Casing business.

2018-07-18 
Toscotec and tissue industry leaders join forces at TAPPI to set guidelines for steel Yankee dryers.

Steel Yankee dryers have been operating since 2000, and in recent years, they have become the dominant trend in the tissue industry. At present, the estimated number of steel Yankee dryers in operation worldwide is almost 400 units.

However, to this day, there aren’t any official guidelines regulating their safe operation, proper inspection and maintenance. The National Board Inspection codes for pressure vessels (such as ASME, PED, CSEI, JIS etc.) regulate the design and construction of steel Yankees, but their domain ends with the delivery. End users often demand that SYD checks and services be performed according to TAPPI’s standards, pointing to the need for an internationally recognized set of guidelines. 

In 2015, Toscotec first put forth the idea of creating an official set of standard practices for steel Yankee’s operations. TAPPI has since entrusted the Yankee Dryer Safety and Reliability Committee - Steel Yankee Subcommittee with the task of creating a new TAPPI TIP (Technical Information Paper) dedicated to Steel Yankee Dryers. In parallel, Toscotec has played a key role in helping update the TAPPI reference book Guidelines for Safe Operation and Condition Assessment of Yankee Dryers, which includes both updated contents for cast iron Yankees and steel Yankees. These publications are expected to become available in 2019.

Toscotec North America’s Lead Technical Service Analyst, Troy Kapalczynski is Chairperson of TAPPI’s Steel Yankee Subcommittee. As he explained, “the subcommittee is composed of manufacturers and end users who collaborate to expand the knowledge of Yankee dryers and address key questions about what and how procedures should be done in order to safely operate, properly control and maintain one of the most important equipment of a tissue mill. We are working to give end users the answers they need to optimize their operations”.

Riccardo Pierini, Toscotec’s Customer Care & Yankee Dryer Service Manager, added, “The subcommittee runs a peer-reviewed, highly specialized and technical project. Specifically for steel Yankees, we addressed issues such as inspection guidelines and principles, non-destructive examinations, routine and non-routine inspections, warm-up and cool-down procedures, and boiler water chemistry. In addition, we also developed maintenance and repair practices among other operating and reliability guidelines. These are all fundamental questions for Yankee managers worldwide”. 

As the leading supplier of steel Yankee dryers worldwide, Toscotec is the leading provider of content for TAPPI’s Steel Yankee Subcommittee. In this respect, Toscotec North America’s Area Engineering Manager, Alessandro Rocchiccioli pointed out, “We have 18 years of experience in the design, manufacture, and operation monitoring and service of steel Yankee dryers. With over 200 references, we have TT SYD running across the globe under a wide range of different environmental, pressure and operating conditions. We want to share this experience with the entire tissue industry, because the market has confirmed that steel Yankees are the future and, as an industry, we need a clear regulatory framework, as cast iron Yankees had back in 1992”.

2018-07-18 
Double A Welcomes Korea Forestry Delegation

Bangkok, Thailand– Korea Forestry Service delegation, South Korea, has recently visited Double A’s integrated pulp and paper mill in Prachinburi Thailand to learn about Double A’s Paper From KHAN-NA sustainable business model that helps in solving environmental, community and economic issues at once.

 Double A Senior Executive VP, Mr.Thirawit Leetavorn (leftmost) welcomed the delegation of Korea Forestry Service to visit Double A’s state-of-the-art paper production process and Paper From KHAN-NA model. Korea Forestry Service witnessed how Paper from KHAN-NA (sustainable fiber source from trees grown along unused land between rice paddies) positively impacts farmers and communities across Thailand to earn supplementary income and helps protect the environment through carbon dioxide absorption.

 They had experienced the essence of Double A Community Participation Project from their visit at Yan Nang Wing school – the rural school where they enjoyed the traditional performances from the students and walked around the school to observe where Paper-Trees were planted. After, they visited the farmer‘s KHAN-NA field –where they interviewed and exchanged of views with farmers and village head about how initiative has improved their lives and communities. The delegation learnt about how Double A Paper Trees will mature to become a sustainable raw material for paper production, an additional source of fund for the school and supplementary income for farmers and communities.

In addition, they had an experience to plant their own Double A Paper-Tree on KHAN-NA and gained a better understanding about KHAN-NA program to adapt and apply to their own initiative in Korea.

The 2-day visit includedDouble A Mill tourwhere the Korea Forestry delegation had the opportunity to learn how a sustainable paper is being manufactured by considering environmental impact, starting from the tissue culture laboratory where the tree saplings are being developed, pulp to paper process up to finishing where the paper is made and become Double A paper to provide to customers around the world.

The delegates also impressed by Double A’s concept ‘No Waste is Wasted’ through a 4D animation to see how Double A has managed its efficient and sustainable resource utilization by turning its wastes from pulping process into renewable biomass. Electricity from renewable biomass is used throughout Double A mill, while the excess is sold to the local grid.

2018-07-17 
The doors to PCMC are always open

469 guests, 5 days, 10 demonstrations, 31 interviews, 316,000 rolls produced and collected into 7000 packs and much more… not just numbers but tangible signs of an outcome.

A grandiose outcome that we want to share with you.

Before arriving at PCMC, you were attentive to our previews, you followed us and accepted our invitation. And you granted us your time, your attention.

What we can give you in return is our gratitude, our commitment and our passion. To follow our projects together.

Because while it is true that the doors of It’s Tissue have closed and our company event has come to an end, our doors will always remain open to welcome you, our customers, partners, friends and anyone who wants to share our evolution with us – our Carevolution.

And of course to all those who have yet to come visit us.

Our new innovation is bringing new products, no-core rolls, on the shelves and we would like to show it to you from up close. Together with our Forte technology and our other services increasingly connected to Industry 4.0, to artificial intelligence applied to different aspects of our work.

Our Open House days were the result of our growth path and have yielded true satisfaction and constituted a spur to do more, always looking to the future.

iT’s Tissue is certainly not the end of a destination but rather a starting point to vie towards the future.

We are pursuing this path with new determination : we are an even closer-knit international team, encouraged by the support of 469 more people.

Thank you, Grazie, Спасибо, Danke, Ευχαριστούμε, Gracias, ขอบคุณ, Merci, ありがと, Obrigado, 謝謝 !

Thank you in all the languages of the world from all of us.

2018-07-17 
Valmet revises upwards its net sales guidance for 2018

Due to positive development, Valmet revises upwards its net sales guidance for 2018.

New guidance for 2018 :
Valmet estimates that net sales in 2018 will increase in comparison with 2017 (EUR 3,058 million) and Comparable EBITA in 2018 will increase in comparison with 2017 (EUR 218 million).

Previous guidance for 2018 on March 21, 2018 :
Valmet estimates that net sales in 2018 will remain at the same level as in 2017 (EUR 3,058 million) and Comparable EBITA in 2018 will increase in comparison with 2017 (EUR 218 million).

Valmet will publish its Half Year Financial Review for January 1 - June 30, 2018 on Wednesday, July 25, 2018 at approximately 3:00 pm Finnish time (EET). The company is currently on silent period and will comment its financial performance and outlook next time after the publication of the Half Year Financial Review.

2018-07-17 
Lecta Secures OHSAS 18001 Multisite Certification Status

The company has already begun adapting to the new ISO 45001 standard.

OHSAS 18001 (Occupational Health and Safety Assessment Series) is the most widely used and internationally accepted standard for occupational health and safety. Following the recent publication of the new ISO 45001 standard, which will replace the OHSAS 18001 standard in three years, Lecta has begun the adaptation process with the goal of working to the new standard as of next year.

Lecta had already obtained individual OSHAS 18001 certification for all its mills, warehouses and offices, proof of its commitment to the safety and health of its employees, as well as the goal of continuous improvement shared with the quality and environmental management systems that the company is based on.

Multisite status entails working under a common management system at all Lecta sites, consistently meeting the requirements set by the standard as a whole. Company headquarters will establish the guidelines and make any corrections needed to achieve this goal.

OHSAS 18001 multisite certification acknowledges the effort made by all Lecta employees as well as highlighting the importance that Lecta places on the prevention of occupational risks and good practices in the workplace.

This multisite occupational health and safety certification enables Lecta to reassert its position as a responsible company ready to respond to the most demanding markets, in keeping with its policy of transparency towards its customers, employees and other stakeholders.

2018-07-17 
Sappi to fund research on Artificial Intelligence and bringing carbon emissions to net zero in the paper and pulp industry

Sappi to fund research on Artificial Intelligence and bringing carbon emissions to net zero in the paper and pulp industry as one of the founding partners of The Prince of Wales Global Sustainability Fellowship Programme

Sappi Limited, a leading global producer of dissolving wood pulp, speciality and packaging papers, graphic (printing and writing) paper and biomaterials, is pleased to announce its support as one of the founding partners of The Prince of Wales Global Sustainability Fellowship Programme.

The 3-5 year fellowships, announced last week by the University of Cambridge Institute for Sustainability Leadership (CISL), will attract academics from around the world to identify breakthrough solutions to meet the UN Sustainable Development Goals (SDGs). At launch eight Fellowships have been funded.

The Sappi supported Fellowship will focus on the UN Sustainable Development Goal “Reshaping the future of industry” (SDG9). It aims to build on Sappi’s current engagement with the CISL by investigating how trends of innovation and sustainability will come together to reshape the future of industry – looking at the paper and pulp industry as an initial example and examining drivers including the rise of artificial intelligence and the need to bring carbon emissions to net zero.

Commenting on Sappi’s decision to become a Founding Partner of the Fellowship Steve Binnie, Chief Executive Officer of Sappi Limited, said :
“We have been engaging at a group and European level with Dame Polly Courtice and the CISL team since 2013. They have helped and supported our European industry efforts related to the Green Growth Platform, the development of a new low carbon pulp technology (DES), exploring financing options to support industry’s transformation and investigating block-chain technology for timber certification.” He continued “The challenge for the pulp and paper industry is how to be much more effective than today, both in our journey towards durable sustainability and to the need for economic vitality and employment for future generations. This Fellowship programme and the research it will deliver will help take this work forward. We live in an age of hyper-innovation and we take responsibility for making it work positively. That is why we have chosen a subject which joins the desire and need for sustainable materials with the most revolutionary technology to appear for over a generation – that of Artificial Intelligence. We anticipate that the Fellowship programme will deliver students with a profound knowledge and understanding of these issues which will help drive new solutions for us and others, creating exciting opportunities far into the future.”

CISL, a 30-year old Institute with 80 staff and a network of 8,000 alumni and 250 companies, will host the Fellowship Programme alongside its existing industry collaborations and executive education programmes to foster an exchange of knowledge and ideas.

Speaking at the launch of the Fellowship, Dame Polly Courtice, Director of the CISL said : “The Prince of Wales Global Sustainability Fellowship Programme will create a rich intellectual space for collaboration between researchers and industry as we seek breakthrough ideas and leadership actions to towards meeting the UN Sustainable Development Goals”.

Over and above Sappi’s topic of Industrial Transformation, the other confirmed research topics include Social and Environmental Accounting ; Investing in Sustainable Communities ; Sustainable Health ; Radical Innovation and Disruption ; The Role of Responsible Business in the Community ; Inclusive Growth ; Pathways to a Circular Economy.

2018-07-17 
Mondi Group acquires an Egyptian paper mill

The international manufacturer of packaging and paper, Mondi Group  has announced that it has signed an agreement for the purchase of 100% of the shares in circulation of the Egyptian national company which supplies paper products for a total of 23.7 million euros.

NPP is an industrial manufacturer of bags, which manages a factory in Giza, near Cairo, and mainly serves regional customers.

Mondi is the main industrial manufacturer of bags in the Middle East, which manages four factories in the region.

“The acquisition of NPP”, states Erik Bouts, CEO of Fiber Packaging in the Mondi group, “completes our network of installations in the growing region of the Middle East and puts us in a leading position in Egypt to develop our activity and better serve our customers”.

2018-07-16 
Wildlife monitoring results attest to the excellent environmental quality of CENIBRA's lands - on PaperFIRST app

CENIBRA carries out a number of actions to monitor environmental parameters to be used as quality indicators and assess its operating activities.

Water, soil, vegetation, and wildlife monitoring programs are conducted in partnership with universities and non-governmental organizations. Their results are taken into consideration when planning the company’s operating activities and establishing protection and conservation strategies for its natural heritage, which comprises in excess of 103,000 hectares of native forests. This area is home to a richly diverse wildlife and numerous water bodies and streams.

Studies to orient wildlife monitoring on CENIBRA’s lands were conducted in 2003 and 2004. As of 2005, such preliminary studies were followed by systemic monitoring with the objective of characterizing the bird and mammalian wildlife on the company’s properties.

Surveys were carried out through field sampling covering CENIBRA’s five operating regions deemed the most representative : Belo Oriente, Ipaba, Cocais, Santa Bárbara, and Sabinópolis.

To date, 371 bird and 41 medium and large mammalian species have been identified within CENIBRA’s properties, out of which 25 bird and 12 mammalian species are officially listed as threatened species. Moreover, such studies showed that most species live in forests, which attests to the high environmental quality of the company’s areas.

The study results also highlight the importance of eucalyptus plantations for biodiversity maintenance. In addition to positive aspects with respect to water and soil conservation, eucalyptus plantations work as wildlife corridors between the region’s native vegetation remnants and allow interaction among different animal species.

As recognition for working in line with the highest international standards of excellence, CENIBRA has been certified to standards ISO 9001, ISO 14001, and ISO IEC 17.025. It is also certified by FSC (Forest Stewardship Council) and CERFLOR/PEFC (Brazilian Forest Certification Program). FSC (in the international scenario) and CERFLOR (in Brazil) are independent organizations whose members are representatives from social, environmental, and economic sectors and establish sustainable forest stewardship principles and criteria.

Check out the bird and medium and large mammalian species in danger of extinction, in the state of Minas Gerais, Brazil, and worldwide, that can be found within CENIBRA properties.

Birds in danger of extinction

  • Tinamus solitarius  - Tinamou
  • Crypturellus noctivagus - Yellow-legged tinamou
  • Aburria jacutinga - Black-fronted piping guan
  • Crax blumenbachii - Red-billed curassow
  • Odontophorus capueira - Spot-winged wood-quail
  • Pseudastur polionotus - Mantled hawk
  • Urubitinga coronata - Crowned eagle
  • Spizaetus ornatus - Ornate Hawk-Eagle
  • Spizaetus tyrannus - Black hawk-eagle
  • Jacamaralcyon tridactyla - Three-toed Jacamar
  • Malacoptila striata - Crescent-chested puffbird
  • Pteroglossus bailloni - Saffron toucanet
  • Primolius maracana - Blue-winged macaw
  • Aratinga auricapillus - Golden-capped Parakeet
  • Amazona farinosa  - Mealy Amazon
  • Amazona vinacea - Vinaceous Amazon
  • Drymophila ochropyga - Ochre-rumped antbird
  • Eleoscystalopus indigoticus -White-breasted tapaculo
  • Phibalura flavirostris - Swallow-tailed cotinga
  • Lipaugus lanioides - Cinnamon-vented piha
  • Pyroderus scutatus  -Red-ruffed fruitcrow
  • Sporophila frontalis - Buffy-fronted seedeater
  • Sporophila angolensis - Chestnut-bellied seed-finch
  • Amaurospiza moesta - Blackish-blue seedeater
  • Cyanoloxia brisonii  - Ultramarine grosbeak

Mammals in danger of extinction

  • Callithrix flaviceps - Buffy-headed marmoset
  • Alouatta guariba clamitans - Brown howling monkey
  • Chrysocyon brachyurus - Maned wolf
  • Lontra longicaudis - Otter
  • Leopardus pardalis - Ocelot
  • Leopardus tigrinus  - Tiger cat
  • Leopardus wiedii - Margay
  • Panthera onca - Jaguar
  • Puma concolor - Cougar
  • Puma yagouaroundi -Jaguarundi or eyra cat
  • Tapirus terrestris - South American tapir
  • Pecari tajacu - Collared peccary
2018-07-16 
CEPI : Latest market data demonstrates strong performance for the European pulp and paper industry in 2017

CEPI, the European association representing the pulp and paper industry, today released its annual market and industry review for 2017 which confirms, despite a challenging global environment, the strong performance of industry in Europe.

“The 2017 figures demonstrate that the European pulp and paper industry is achieving a phenomenal turn around. Whether it is production, added value or exports, all key indicators are positive. The current level of investment, not seen since 2005, is indicative of industry’s self-confidence and the acceleration of its transformation.” says Sylvain Lhôte, CEPI Director General.

The latest investment figures also bode well for the industry’s ambitious investment agenda. 2017 exhibited a 7.5% growth of investment from 2016, at over 5 billion euros, which is aligned with the transformation outlined in the industry’s 2050 ‘Investment Roadmap’. 

Consumption of paper is up by 0.5%, a significant increase based on previous trends. Similarly the production of paper and board is up 1.5% from 2016, benefiting from a more favourable economic environment and from conditions promoting sustainable solutions.

Exports were particularly strong tallying a 5.2% increase from 2016, a noteworthy figure in the background of growing international tensions on trade.

Likewise the industry has also proved performant when it comes to paper for recycling. Notwithstanding the introduction in 2017 of the Chinese waste import restrictions, the paper and board recycling rate has increased to 72.3%. This comes in the same year that industry has witnessed a 1.4% increase in the utilisation of paper for recycling.

2018-07-13 
Valmet to supply a third Advantage tissue production line to Lila Group in Turkey

Valmet will supply a complete Valmet Advantage DCT 200 tissue line to the Turkish tissue manufacturer Lila Group in Corlu, 100 km west of Istanbul. The TM3 line will be equipped with all state-of-the-art options available including stock-preparation and an extensive automation package to achieve production with high efficiency and low energy consumption. Start-up is planned for 2020.

Valmet has previously delivered two Advantage DCT 200 tissue lines to the same mill. TM1 started up in 2007 and TM2 in 2012. In addition to the new tissue line, Lila Group also ordered a rebuild of their TM1 and TM2 to Advantage ViscoNip press configuration.

The orders were included in Valmet’s second quarter of 2018 orders received. The value of the order will not be disclosed.

"For us it is important to collaborate with a supplier who understands our demands and has the capability to deliver equipment that can meet our targets for efficient production, low energy consumption and high tissue quality. From our experience, we know that Valmet provides the best technology for our needs. In addition to the new tissue machine, we also have high expectations to improve our operations on TM1 and TM2 with the rebuild of the press sections," says Orhan Ogucu, Chairman of Lila Group.

"The Valmet Advantage DCT 200 concept with the Advantage ViscoNip press has become standard in the Turkish tissue market. We are happy to once again be trusted as a partner, supporting Lila Group’s expansion plans and are looking forward to working together realizing their targets," says Björn Magnus, Sales Director, EMEA, Valmet.

Technical information about the delivery

Valmet’s tissue machine delivery will comprise of a complete Advantage DCT 200 tissue production line with stock preparation equipment and the Advantage tissue technology. The scope will also include an extensive automation package with DCS, QCS and Softness sensor. Start-up, commissioning and training are also part of the delivery.

The new machine TM3 will add a capacity of 70,000 tons of tissue products for the domestic and export market.

2018-07-13 
DS SMITH PLC -Results of general meeting

DS Smith Plc announces that, at the General Meeting held today, the resolution proposed to approve the Company’s acquisition of Papeles y Cartones de Europa, S.A., known as Europac, pursuant to the terms and subject to the conditions contained in the offer document to be approved by the Comisión Nacional del Mercado de Valores (the Spanish Securities and Exchange Commission) (as set out in full in the Notice of General Meeting dated 19 June 2018) was passed as an ordinary resolution.
The voting figures for the Resolution are set out below.

Votes%Votes%Total Votes castVotes Withheld

1. Percentages are expressed as a proportion of the total votes cast (which does not include votes withheld).

2. A vote withheld is not a vote in law and is not included in the calculation of the votes "For" or "Against" the Resolution, nor the calculation of the total votes cast.

3. Any proxy appointments which gave discretion to the Chairman have been included in the "For" total.

The total number of Ordinary Shares in issue as at close of business on 10 July 2018 was 1074584333. Shareholders are entitled to one vote per Ordinary Share held. Votes were cast in respect of approximately 73.86% of the Company’s issued share capital.

Gareth Davis, Chairman, said "We are delighted with the very high level of support from our shareholders for this exciting opportunity for DS Smith. The acquisition has a highly compelling strategic rationale and we expect that it will create significant value for customers and consistent and attractive returns for DS Smith shareholders, strengthening our position as a leading global supplier of sustainable packaging solutions"

2018-07-13 
Swedish research breaks new ground – closer to a commercial paper battery

BillerudKorsnäs and Uppsala University are making paper batteries a reality, paving the way for energy storage in packaging materials.

BillerudKorsnäs and researchers at Uppsala University have together taken an important step towards the future’s paper batteries. Together they have taken basic research based on pure cellulose from algae and developed it to work with the same type of fibre that BillerudKorsnäs usually uses to manufacture packaging material. This development opens up for both inexpensive and eco-friendly batteries. The long-term aim is to enable large-scale production and the future use of paper batteries for applications in areas such as smart packaging.

Technology for large-scale production processes
The development work is being carried out by one of Sweden’s foremost research teams under Maria Strömme, collaborating with BillerudKorsnäs, as a leading company in the development of sustainable packaging technology, in a completely new form.

“What’s special in this case is the model for collaboration between BillerudKorsnäs and Uppsala University that has resulted in technology adapted to large-scale production processes. We’re combining the deep theoretical expertise of the researchers with our understanding of innovation and production technology. By successfully creating a joint platform, we can focus our work on the future, on creating an advanced product that can still be produced in an effective way,” says Lars Sandberg, project manager for innovation at BillerudKorsnäs.

Smart, connected packaging
In the long term, the paper battery opens up possibilities for developing packaging that is both smart and more sustainable. Small paper batteries with sensors can in the future open up for packaging that can be traced through the entire transport chain. This includes, for example, packaging that measures temperature or position in real time and provides information on what is happening with an item during transport.

A paper battery entails many new ways of using packaging and can thus offer exciting opportunities for the packaging industry and BillerudKorsnäs customers that wish to establish systems that safeguard quality and delivery reliability. For example, a light sensor along with a BillerudKorsnäs paper battery could provide information on where in the transport chain a product disappeared from its packaging.

With electrodes based on cellulose from wood fibre, the ambition is that in the future, it will be possible to recycle batteries along with their boxes and make them into new boxes or paper batteries. 

“The paper battery is a key piece of the puzzle in efforts to produce smart packaging that requires small, sustainable power sources. By enabling this type of sustainable packaging, the work on the paper battery is fully in line with BillerudKorsnäs’ vision of challenging conventional packaging for a sustainable future. Storing energy in paper instead of in lithium batteries, for example, allows for bio-based batteries that can form part of a circular system, which provides major sustainability benefits,” says Magnus Wikström, technical director at BillerudKorsnäs.

2018-07-12 
Official opening of plant extensions and new equipment in Limerick

Rigid Containers - Official opening of the plant extensions in Limerick, Ireland

Rigid Containers completes 8 million EUR investment in Limerick, Ireland, and announces plans to increase workforce by 30% in the next two years. The announcement was made last week during the official opening of two major extensions and the launch of new state of the art conversion equipment.

The southern extension is 880 square metres and accommodates a new materials handling system. The western extension consists of a 708 square metre ground floor and a 400 square metre of mezzanine floor. The ground floor accommodates a new gluing machine and ancillary equipment, while the mezzanine allows for more offices, meeting rooms and other staff facilities.

The new materials handling system installed as part of the overall investment consists of three double-bay transfer shuttles, 23 lanes of belt conveyor, additional storage space for what is known as ‘Work in Progress’ (WIP), new corrugator take-off area and a new belt conveyor to feed the Texo rotary die-cutter and the new gluer.
30% growth of production volume since acquisition in 2015

In 2015 VPK Packaging Group bought ICS Europaks as a going concern. Since then Rigid Containers Limerick has operated and grown as a business unit, producing high-end corrugated packaging for industry, consumer goods, food & beverages, pharma & medical, and e-commerce.

Rigid Containers has significantly invested in facilities and technology, and providing sponsorship and support to voluntary groups in Limerick city and county, while pursuing a deliberate procurement strategy that focuses on sourcing local suppliers for non-commodity expenditure.

Mark Munnelly, Rigid Containers Site Director, said, “Rigid Containers has quickly established itself as a centre of excellence for quality service through flexibility and operational excellence. Since taking over in 2015, we have grown our production volume by 30%, with plans for further expansion. While investment in both manufacturing technology and facilities are central to the progress made by Rigid Containers to date, our sustainable competitive advantage lays with our talented and committed 95 staff members, many with over 20 year experience in the industry.
Rigid Containers - Official opening of the plant extensions in Limerick, Ireland

“We are now formulating plans to introduce a third shift that will increase our employee numbers by a further 25 to 30 jobs over the next two years,” Mr Munnelly said.

“We are also committed to the local community, and welcome the opportunities to get involved with voluntary groups and organisations. We are currently sponsoring underage GAA teams in Limerick and Limerick City FC women’s team, so our competitiveness goes far beyond the business park, and our investment in the county’s future goes beyond our 100% sustainable packaging and pursuit of local suppliers where possible.”

Officially opening the newly extended site Jean-Paul Macharis, Chairman and Managing Director of VPK Packaging Group, said, “As a family run business our investment strategy has always been to derive value from long term investment programmes. The Limerick business unit is a perfect example of this approach as we see local management combining capital investment with a realignment of the cost base and operational excellence to underpin our commercial strategy.”

2018-07-12 
Europac improves conditions of its syndicated loan

·Reduction in interest rate of 20 additional basis points and extension of deadline for debt maturity by two years

· Following the latest revision of the syndicated loan, signed in December 2016, the company’s ordinary finance cost dropped by 27%

· Europac has also renewed its commercial paper issue programme on the MARF, increasing its maximum amount from 100 to 200 million euros

This afternoon the Europac Group signed a novation of its syndicated loan, taken out in July 2015 and revised for the last time in December 2016 for a sum of 260 million euros. The agreement between the company and financial institutions means an additional reduction in the finance cost and an extension to the maturity dates of the loan.

The new conditions specifically mean a reduction in the interest rate of 20 additional basis points and an extension of the debt maturities by two years from 2022 to 2024. In this context, the additional credit line now available to the company came with a lower interest rate of 50 basis points.

It should be remembered that the improved conditions tied to the previous novation of the syndicated loan, signed in December 2016, were applied during the whole of last year. Accordingly, the finance cost in 2017 dropped by 48% to 6 million euros. Without taking into account the extraordinary effects, this reduction would have amounted to 27%.

On another note, the Europac Group renewed its commercial paper issue programme on the Alternative Fixed-Income Market (MARF), increasing its maximum amount from 100 to 200 million euros. The aim of this operation is to continue reducing finance costs and diversify sources of finance.

Strength and flexibility

José Miguel Isidro, Chairman of the Europac Group, highlighted that “these two operations, which, in addition to strengthening and making the company’s finance structure more flexible, diversify the sources of credit, reflect the extraordinary financial soundness of the group and the robust management of this matter”.

2018-07-12 
Market pulp producers saw higher profits in the 1Q/18 as pulp prices jump to record high levels, while production costs increased only slightly

Strong pulp markets and record high prices for both softwood and hardwood market pulp resulted in upward price pressures on wood fiber throughout the world in the 1Q/18, reports the Wood Resource Quarterly (WRQ). The Global Softwood Fiber Price Index (SFPI)was up by 3.4% from the 4Q/17 to the 1Q/18, the second highest quarter-to-quarter increase in seven years. Softwood prices rose in all 20 regions covered by the WRQ with the exception of Eastern Canada, where chip prices fell 16% q-o-q (in US dollars).

Hardwood pulplogs saw a more modest price increase than softwood pulplogs, with prices rising the most in Russia, Spain and Finland. The Global Hardwood Fiber Price Index (HFPI)reached a three-year high in the 1Q/18 and was 8.0% higher than in the 1Q/17.

Profit margins continued to improve for pulp companies in the 1Q/18 as pulp prices increased faster than the wood fiber costs. Northern Bleached Softwood Kraft Pulp (NBSK) pulp prices jumped in the 1Q/18 to new record highs, while the crucial wood costs were only slightly higher. This resulted in a record low wood fiber cost percentage of 22.5% of the pulp price. With the wood fiber costs accounting for 40-60% of the total manufacturing costs, market producers can expect healthy returns in 2018.

The wood costs share for Southern Bleached Softwood Kraft Pulp (SBSK) price was also down, dropping to 16.2% . This is the lowest it has been in 25 years, and is mainly due to sharply increasing pulp prices. The SBSK pulp is produced in the US South, Iberia, Latin America and Oceania.

For Eucalyptus Bleached Kraft Pulp (EBK), the wood fiber share fell to 16.1% in the 1Q/18, the lowest cost share since 2003, according to the WRQ. As with the other major pulp grades, it was mostly the result of higher pulp prices rather any substantial changes in wood costs.

2018-07-12 
Toscotec’s MODULO-PLUS fired up at Celupaper S.A., Argentina.

  Celupaper S.A. successfully started up PM4, a new MODULO-PLUS tissue machine supplied by Toscotec, at its Papelera Nicaragua mill, Argentina. The tissue machine started producing sellable paper immediately after start-up and is scheduled to reach the target speed in the following weeks, after careful fine-tuning.

The new MODULO-PLUS produces 65 tpd and it features a single layer TT Headbox, TT SuctionPressRoll, TT SYD-3200MM, TT Milltech-MYH monosystem gas-fired hoods. The scope of supply also includes the approach flow system, the electrification & control system, training, erection supervision, commissioning and start-up assistance.

PM4 is part of a series of repeated orders awarded to Toscotec by the leading South American tissue producer. In 2015, the Italian manufacturer carried out the rebuilding of PM2, an existing Fourdrinier machine, and supplied a new steel Yankee dryer TT SYD-2500MM and the complete steam and condensate system. In 2016, Toscotec supplied PM3, a complete MODULO tissue line.

Mario Speranza, CEO of Celupaper S.A. says, “Thanks to the continued production increase implemented with Toscotec’s plants, we have grown significantly in the South American market. Since 2015, we boosted production by over 100 tpd. Tissue quality, machine efficiency and energy reduction are our key standards of investments in new equipment. Throughout 4 years of close partnership with Toscotec, we have achieved good results with respect to all of these aspects and have continuously improved such results”.

“PM4 project evinced once again the excellent cooperation we have with Celupaper. With every new project, we aim to improve their performances. We worked intensively together on the reduction of energy consumption, starting from the design, with our TT DOES solution (Drying Optimization for Energy Savings) all the way to the fine-tuning of the plants at the mill site. On PM4, we also optimized the layout of the electrical and auxiliary plants, to guarantee better access for the operators to the different areas of the machine" commented Toscotec’s Project Manager Pier Paolo Brunazzi.

2018-07-12 
Kemira increases prices of sizing technologies

Kemira, a global chemicals company serving customers in the pulp and paper industry, announces price increases for sizing technologies globally.

Effective immediately or as contracts allow, the price of FennoSize ASA and AKD based offerings will increase by up to 15%.

The decision is triggered by continuous cost increases of raw materials, energy and logistics, and regulatory compliance requirements combined with limited availability of key raw materials which are used in the manufacturing of these technologies.

2018-07-11 
Smurfit Kappa’s industry-leading commitment to sustainability has been recognised once again by the Euronext Vigeo Eiris index.

The packaging leader was listed on the sustainability index for the sixth year in a row after distinguishing itself for its Environmental, Social and Governance (‘ESG’) performance.

The Euronext Vigeo Eiris index is composed of the 120 highest-ranking listed companies for corporate social responsibility performance. To qualify, companies are subject to examination of their sustainability programme by a team of analysts which reviews up to 330 indicators. Only companies that can produce hard evidence of their sustainability programmes and score highly against industry benchmarks make the final list.

Smurfit Kappa’s annual Sustainable Development Report provides a detailed and transparent update on its ESG performance in five strategic areas of focus : Climate Change, Forest, Water, Waste and People.

In the 2017 report, which was launched earlier this year, the company announced several key sustainability achievements including meeting three targets relating to water, climate change and health and safety ahead of time. The report also revealed that Smurfit Kappa has invested approximately €5 million in social and scientific projects to benefit the communities in which it operates.

Steven Stoffer, Group VP Development at Smurfit Kappa, said : “We are delighted to have been listed on this prestigious index again. For Smurfit Kappa, sustainability is not only about mitigating climate change and reducing inefficiency, it is also about taking a sustainable approach to every aspect of our business.

“With a growing number of investors and funds incorporating ESG criteria into their investment decisions, it’s vital for us to provide this assurance. Many of our customers also expect their business partners to have a genuine commitment to corporate social responsibility and this is something that Smurfit Kappa has won several supplier awards for.”

Smurfit Kappa is also listed on the FTSE4Good, Ethibel and STOXX Global ESG Leaders investor rating systems.

2018-07-11 
Alain Kouck has passed away

Alain Kouck was the president of Editis Group in France since 2002 and President of Culture Papier since 2016. A subsidiary of the Spanish Group Planeta, Editis is the second largest Group in the publishing sector in France.
In 2006, Alain Kouck succeeded Laurent de Gaulle as President of Culture Papier. This association was founded in January 2010 to promote the social and environmental values of paper. Alain Kouck was very committed and involved in this role. He was a great defender of paper and printing industries. “La Papeterie” conveys its sincerest condolences to his family and relatives

2018-07-11 
Metso to publish its Half-Year Review for January-June 2018 on Thursday, July 26, 2018

Metso’s January-June 2018 Half-Year Review will be published on Thursday, July 26, 2018 at about 9:00 a.m. EEST and can be found at www.metso.com/latestreports.

Metso’s Interim President and CEO Eeva Sipilä will present the financial results in an audiocast and a conference call for analysts and investors, held in English, on the same day at 1:00 p.m. EEST. Webcast is viewable at www.metso.com/latestreports. A recording and a transcript will be available at the same webpage after the event has finished.

Conference call participants are requested to dial in five minutes before the event on :
United States : +1 929 477 0338
other countries : +44 (0)330 336 9104

The confirmation code for joining the conference call is 800906.

Metso will not arrange separate event for investors, analysts or the media at its headquarters on the day of the publication.

2018-07-11 
Valmet receives the 250th order for its successful Valmet Pulp Analyzer (Valmet MAP)

Valmet has received the 250th order for its successful Valmet Pulp Analyzer (Valmet MAP) for managing various applications regarding fiber furnish management at pulp and paper mills. The milestone analyzer will be installed at Sichuan Qianwei Fengsheng Paper Co. Ltd in China. The delivery will include a Valmet Kappa QC Analyzer, too. The raw materials used in the mill’s tissue production include bamboo.

The order was included in Valmet’s second quarter of 2018 orders received. The value of the order will not be disclosed. The solutions will be delivered in the third quarter of 2018.

"First, we trust Valmet and its advanced analyzer solutions. With accurate measurements, we will be able to get faster and more precise online updates of key fiber and papermaking furnish properties to improve runnability and productivity. Second, stabilizing the entire fiber line control will help us reduce variation, chemical usage and production costs. Also, easy-to-maintain Valmet analyzers will improve our labor efficiency and operator effectiveness as well," says Chuanping Zhou, General Manager at Sichuan Qianwei Fengsheng Paper.

"It is nice to cooperate with a customer who really wants to develop the mill’s total pulp and tissue line performance. It means taking good care of basic issues. When the ultimate goal is clear both for the customer and the supplier, it is easy to find the right solutions and implement them. Performance improvement and development is a long-term project for which reliable analyzers and controls provide a solid foundation. It is easy for the mill and also for Valmet to take next steps towards more sophisticated solutions in the future when the foundation is reliable and in a good shape," comments Janne Määttä, Manager, Pulp & Paper Applications, Valmet.

Valmet’s existing installations at Sichuan Qianwei Fengsheng Paper include a Valmet Brightness Measurement (Valmet Cormec5 X) and a Valmet Residual Measurement (Valmet Polarox5). Valmet is currently delivering a Valmet Fiber Image Analyzer (Valmet FS5) and consistency transmitters for the mill, too.

2018-07-11 
ANDRITZ acquires Diatec, Italy

ANDRITZ has acquired a 70% stake in Diatec S.R.L., a leading manufacturer of converting machines for the hygiene and food packaging industries based in Collecorvino in the region of Pescara, Italy. The remaining 30% will stay in the hands of the two current shareholding families.

Diatec designs and manufactures a wide range of special machines and technological solutions, mainly for the production of baby diapers and other absorbent hygiene products, but also for food packaging. With this acquisition, ANDRITZ complements its product portfolio in Nonwoven and is now able to offer the complete supply and value chain, from the raw material, to webfoming, finishing, and converting.

Diatec was established in 1992 and has developed very favorably since then, with many international references and renowned customers around the the world. The company is known for its innovative spirit, providing flexible and sophisticated solutions for the hygiene sector.

The Diatec owners and managers, who will continue to work in the company, acknowledge that ANDRITZ is the best partner to support the company’s long-term growth and – together with employees and suppliers – to create synergies that can satisfy the demands of its customers.

Andreas Lukas, Division Manager for ANDRITZ Nonwoven, says : “We are very excited about this complementary acquisition that extends our market coverage, process technology, and product range within the nonwovens industry.”

Diatec’s General Manager, Luigi Mancini, comments : “With ANDRITZ, we have found our ideal partner to strengthen our international market position and we are looking forward to growing further within this collaboration.”

2018-07-11 
BillerudKorsnäs will make a provision of SEK 450 million in the second quarter 2018

BillerudKorsnäs has within the scope of the recently launched group-wide program for improved production efficiency decided to implement measures with the aim of strengthening the workplace efficiency and environment at several of the Group’s mills. In total, a provision of approximately SEK 450 million will be made, of which approximately SEK 200 million will impact cash flow over a three-year period. The provision will have a negative effect on the result in the second quarter of 2018.

The measures to strengthen the workplace environment will be taken during the ordinary maintenance shutdowns, starting after the summer, and continue through two to three maintenance cycles, depending on the work carried out. The measures will include demolition of old buildings and decontamination.

As the final stage of the consolidation of Billerud and Korsnäs, it has also been decided to implement unified accounting principles regarding spare parts and consumables at the mills, which will lead to impairment losses with effect in the second quarter.

In total, a provision of approximately SEK 450 million, of which approximately SEK 200 million will impact cash flow over a three-year period, will be made in the second quarter of 2018.

The provision will be reported as an item affecting comparability under unit Other. The interim report for the period January-June 2018 will be published on 18 July 2018.

2018-07-11 
Konecranes to deliver two industrial cranes for Brazilian pulp manufacturer

Konecranes will deliver two industrial cranes with specially designed spreader clamps to CMPC Cellulose Riograndense, located in Brazil. The order was received in the second quarter of 2018.

Celulose Riograndense produces pulp from eucalyptus short fibre cellulose. In the city of Guaíba, state of Rio Grande do Sul, Celulose Riograndense has a pulp producing unit with capacity to generate 1,75 million tonnes of pulp, supplying a diversified market worldwide.

Celulose Riograndense utilizes cranes to load pulp bale units to ships at the factory landing. The new Konecranes cranes will replace existing cranes to help improve performance and reliability of the loading process. The two cranes will be designed for the load of 2 million tonnes of pulp per year.

“CMPC is looking for partners who can offer cutting-edge solutions in their strategic activities. Currently, we have 90 percent of pulp production through cranes. When we choose Konecranes, we choose the safety, quality and reliability of a world leader in the field”, says Mr. Roberto Hallal, Logistic Manager at Cellulose Riograndense.

The order consists of two tailor-made cranes with specially designed, adjustable spreader-clamps and specific Smart Features, including Target Positioning. The cranes are operated with cameras and sensors from a movable cabin, which help to enhance operational safety. The cranes can handle loads of up to 16 tons.

“These cranes will help to improve safety and efficiency of the customer’s pulp bale loading process. Several semi-automation features will assist the crane operator in moving pulp fast and accurately. Crane features were selected after we had studied the customer’s loading process carefully. Once again, understanding the customer’s process was the key factor when selecting the right solution,” says Arto Hujanen, Director, Paper & Forest Industry at Konecranes.

The first crane will be delivered to Celulose Riograndense in December 2018, with the second one following by April 2019.

2018-07-10 
DS Smith Leeds recycling depot fire

A fire incident at DS Smith’s paper recycling depot in Leeds was attended to by West Yorkshire Fire and Rescue Services on Saturday 7th July 2018.

The fire at the depot started Saturday afternoon when no staff or contractors were present on site.

Yorkshire Ambulance’s Hazardous Area teams also attended the blaze but nobody was injured in the incident. The fire was brought under control Saturday evening.

At this stage DS Smith is working with the relevant authorities to establish the cause of the fire. Any damage is yet to be fully assessed but the fire was contained to onsite storage buildings.

Due to the swift action of the fire services, building damage was limited and all mobile plant, vehicles and equipment is intact.

Production on site has been suspended for the next 2 to 3 days whilst power is restored, but collections to customers will continue as usual.

DS Smith would like to thank West Yorkshire Fire and Rescue Services for their speedy response and efficiency in bringing the incident safely under control.

2018-07-10 
Arjowiggins : exclusive negotiations with Fineska for the sale of Arjowiggins Graphic and Arjowiggins Creative Papers

Arjowiggins has entered into exclusive negotiations with Fineska for the sale of Arjowiggins Graphic and Arjowiggins Creative Papers. Once this operation has completed, Sequana will have exited its paper manufacturing activities
Arjowiggins has announced the planned sale of Arjowiggins Graphic and Arjowiggins Creative Papers to Fineska BV, the parent company of Eska Group, the renowned Dutch-based graphic cardboard business controlled by Andlinger & Company, a private investment group which also owns Crown Van Gelder (CVG), a Dutch specialty papers manufacturer.
The gross amount of the transaction should be €125 million. Given the companies’ debts and other liabilities, net proceeds from the sale should be in the region of €20 million (to be adjusted at completion of the transaction in line with balance sheet items).
The businesses to be divested reported sales of €528 million in 2017, or 19% of Sequana Group’s consolidated sales, of which 61% comprised recycled graphic and specialty (i.e., laminated and transfer) papers and 39% premium fine papers and specialty papers (i.e., bookbinding and tracing paper). They operate eight mills located in France, the UK, Spain and China and employ over 2,000 people. More precisely, Arjowiggins Graphic is composed of 3 paper mills in France (Bessé-sur-Braye, Château-Thierry and Le Bourray). On the other hand, Stoneywood (UK), Chartham (UK), Neuilly-en-Telle (France), Gelida (Espagne), Quzhou (Chine) are part of Arjowiggins Creative Papers.
Information and consultation procedures have been initiated with the relevant work councils and the planned sale will be submitted for approval by the national competition authorities in all countries where it is required. The transaction is expected to complete by the end of October 2018.
In the wake of the major restructuring operations carried out in 2014 and 2015 to refocus on specialty papers, these two divisions generated positive cash-flow in 2017 and they should report a profit in 2018.
Following a competitive bidding process that was part of Sequana’s strategy of weighing up its options and playing its part in the necessary consolidation of the paper industry, Sequana’s Board of Directors has chosen Fineska’s offer. This operation, which is satisfactory for Sequana, would also safeguard the future development of Arjowiggins Graphic and Arjowiggins Creative Papers within a private investment group that has been supporting CVG and Eska – two renowned players in the specialty papers and graphic cardboard sectors – for a number of years.
This transaction is a major milestone for Sequana that would mark its exit from all paper manufacturing activities with the exception of Arjobex. Since 2008, Sequana has been refocusing on its paper distribution business where its subsidiary Antalis boasts leading positions in Papers, Industrial Packaging and Visual Communication in Europe.
Update on the litigation with BAT
The hearings before the Court of Appeal in London took place in early June. Prior to this, BAT had abandoned a significant part of its claims, notably in relation to the first dividend. As with any legal dispute, the outcome is in the hands of the courts, however the Group remains confident of a favourable outcome. The decision of the Court of Appeal should be handed down before the end of October.
Once it has taken stock of this decision and its related impacts, Sequana will devise and present its strategy.
Commenting on these developments, Sequana’s Chairman and Chief Executive Officer Pascal Lebard said : “The planned sale of Arjowiggins’ Graphic and Creative Papers divisions is the culmination of the process of weighing up our options in a market that is set to continue to consolidate. It meets our objective of ensuring the long-term development of our activities as part of a major industry player or an investment fund. This was already achieved in the past with the sale of our Decor paper business (to Munksjö), our Latin American banknote businesses (sold to Fedrigoni), and Arjowiggins Healthcare (sold to Meeschaert Private Equity). By becoming part of Andlinger & Company, Arjowiggins Graphic and Arjowiggins Creative Papers would benefit from the support of a private investment group that has been supporting two renowned players in the specialty papers sector for a number of years. The sale would affect neither their business relations nor their partnership with Antalis. Once the decision of the Court of Appeal in London – which we await with confidence – is handed down in late October and once this transaction is completed, Sequana will devise and present its strategy.”
Sequana reported sales of €2.8 billion in 2017 and employed some 7,800 people worldwide. The Group is structured into two businesses :
 Antalis : leader in B2B distribution of Papers and industrial Packaging and number two in the distribution of Visual Communication media in Europe with around 5,500 employees based in 43 countries.
 Arjowiggins : global producer of recycled and specialty papers with around 2,300 employees.

2018-07-09 
TMC: forward thinking - Looking ahead. Anticipating market demands.

Thanks to this forma mentis, we have become the largest manufacturer of primary and secondary packaging for the field of Tissue in the world.
A 20-year experience in the course of which we have solved thousands of packaging needs for our customers and guaranteed safe solutions on which we daily build our innovations and the satisfaction of our customers.
And today, in IMA we have found the best possible partner for the further progress of our company to attain the next technological and commercial goals. Entering the IMA Group means a strong acceleration in our innovation, product development and geographical expansion projects, allowing the Group to create an undisputed international hub leader in the Nonwovens market.
Two are the great TMC novelties presented at “It’s Tissue 2018.
TMC Plastic-Free-Pack
System efficiency, duration of the investment, cost reduction and sustainability are the guidelines that inspire us. This is why we are working to reduce the thickness of the packaging material and optimize energy consumption by using sealable and biodegradable materials for packaging.
For It’s Tissue 2018 we decided to present the first plastic-free packaging with primary wrapping in heat-sealable paper and secondary cardboard grouping.
A completely natural, compostable packaging, respectful of the environment in a critical period for our planet, a moment requiring decisive and resolute interventions.
A perfectly efficient solution on existing TMC machines that, thanks to specific upgrades, can work both with paper and poly extremely easily.
Convinced of the importance of this issue and to favor the dissemination of this innovation, TMC has decided to dedicate a specialized team to all customers worldwide interested in developing this type of sustainable packaging.

DNA MAP : accelerating the future.
Controlling production efficiency is today the main industry priority. We always look for data.
More and more data. But are we sure that collecting lots of data is enough ?
Data alone are not the answer. And too many data, could be even misleading.
The true answer is DNA MAP. DNA MAP is the difference between collecting data, and really knowing how to use them successfully.
DNA MAP not only monitors real time machine conditions, but also collects raw data translating them into meaningful and valuable information, providing a prioritized action list.
DNA MAP is an open platform that :
• can dialogue with all ERP and MES systems
• can connect to any kind of equipment
• can receive and analyze data from all PLC systems
This is the future.
DNA MAP is available on PC, laptop, tablet and smartphone.
Whenever you like.
Wherever you are. Whoever you wish to share information with.
DNA MAP connects you to the new era of FORWARD THINKING.

2018-07-09 
Greycon provides APRIL Group with new planning software to improve customer service

Greycon is the world’s leading provider of production planning, forecasting, scheduling and manufacturing execution systems that have been designed specifically for roll-based and flat sheet industries.

Greycon was recently appointed by the APRIL Group, one of the largest, most technologically advanced and efficient makers of pulp and paper products in the world, to further optimize its sales and operations planning by integrating Greycon sales and operations solution “opt-Studio” with APRIL’s
Enterprise Resource Planning and Manufacturing Execution Systems. Greycon worked together with the APRIL Group and Accenture to deliver this solution.

Praveen Singhavi, President, APRIL Group, said : “In order to continue to meet customer demand and deliver high levels of customer service, we have integrated opt-Studio with our existing solutions.

“opt-Studio has improved end-to-end visibility of our sales orders, while being able to better optimize paper production (block planning) and finishing area scheduling.”

Vassilis Gkamouras, Senior Consultant at Greycon said : “APRIL Group is one of the most efficient pulp and paper mills in the world. The project was divided in three phased roll-outs to enable quick deployment of capabilities and took 14 months to complete.”

“The roll-out required expertise in global project management, change management, supply chain enablement and systems integration. The project was delivered on-time, in-full and within budget due to excellent team work between the partners involved.”

2018-07-09 
United States Department of Commerce Announces Termination of Supercalendered Paper CVD Order

Resolute Forest Products Inc. is pleased to announce that the United States Department of Commerce is formally revoking the countervailing duty order on supercalendered (SC) paper from Canada, retroactive to August 3, 2015. Collection of cash deposits on imports of SC paper from Canada will cease, and all cash deposits that have been collected from importers of record since August 3, 2015, will be returned with interest.

Resolute’s cash deposits as of June 30, 2018, total $60 million. The company will also receive accumulated interest on these deposits. The precise timing of the refund will be set out in a Federal Register Notice to be published in the upcoming days. 

Revocation of the countervailing duty order is pursuant to issuance today of a final determination in the Changed Circumstances Review that the Department initiated on May 14, 2018. The Department initiated the Changed Circumstances Review after Verso Corporation, the principal remaining producer of SC paper in the United States and the only remaining petitioner, wrote to Commerce Secretary Wilbur Ross on March 21, 2018, that it was no longer interested in the continuation of the countervailing duty order. All other interested parties in the SC paper proceedings, including the federal and provincial governments in Canada, notified the Department that they supported Verso’s request for a Changed Circumstances Review.

Cautionary Statements Regarding Forward-Looking Information

Statements in this press release that are not statements of historical results, performance, financial condition, or other historical information of Resolute Forest Products Inc. are "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. They include, for example, statements regarding the anticipated revocation of the countervailing duty order on supercalendered paper from Canada and return of cash deposits associated therewith. Forward-looking statements may be identified by the use of forward-looking terminology such as the words "will," "expect" and other terms with similar meaning indicating possible future events or potential impact on our business or our shareholders.

The reader is cautioned not to place undue reliance on these forward-looking statements, which are not guarantees of future performance. These statements are based on Resolute’s management’s current assumptions, beliefs and expectations, all of which involve a number of business risks and uncertainties that could cause actual performance or outcomes to differ materially from those expressed in this press release. Some of the potential risks and uncertainties that could cause the company’s actual future performance or outcomes to differ materially from those expressed or implied in this press release include, the potential risks and uncertainties described under the heading "Risk Factors" in Part I, Item 1A of the company’s annual report on Form 10-K for the year ended December 31, 2017.

All forward-looking statements in this press release are expressly qualified by the cautionary statements set out or referred to above and in the company’s filings with the U.S. Securities and Exchange Commission and the Canadian securities regulatory authorities. The company disclaims any obligation to publicly update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by law.

2018-07-09 
Societal impacts have a visible role in UPM's EMAS reporting

UPM has today published the EMAS (EU Eco-Management and Audit Scheme) statements of its pulp and paper mills. The statements are more extensive than ever. Over the years, the company has reported on environmental impacts at its pulp and paper mills in Europe, China and Uruguay. Now the reports also provide a thorough analysis of the company’s societal impact at a local level.

According to Gabriele Wende, Director, Reporting and Product Stewardship, UPM, people are interested in companies’ impact on society in addition to the environmental matters. "Mills are a part of local people’s everyday lives, so what happens within the company is not insignificant by any means. That’s why we want to provide verified and concrete information, e.g. on our contribution to employment, tax income and purchasing power, as well as co-operation with the communities. The information also has to be easily accessible," Wende says.

"UPM’s initiative to open the scope of its environmental reporting to include social indicators shows the strong commitment of the company to transparency, a value shared by all EMAS organisations," says Kestutis Sadauskas, Director for the Green Economy at the European Commission’s Directorate General for the Environment.

"The performance of the company is verified by an independent EMAS verifier, providing the public and other stakeholders with reliable information on its contribution to sustainable development. We would encourage other companies to move in this direction too", he says.

A mathematical model of effects on consumption

Extended EMAS reporting was improved first time this year using a mathematical calculation model developed by the Research Institute of the Finnish Economy. The model was used to estimate indirect jobs and effects on consumption created by the company’s production units in Finland.

Research Director Jyrki Ali-Yrkkö from Etlatieto Oy says, that calculations can be made both regionally and nationally.

"The model is based on input-output statistics from Statistics Finland. Those statistics show how companies from different industries buy goods and services from each other," Ali-Yrkkö explains.

Local tax income generated by our business operations as well as cooperation with local operators, such as educational institutes, are an essential part of our societal impacts. Read more about these and many more societal impacts at the following websites :


www.upm.com > Responsibility

The final EMAS registration is complete only when the Corporate Environmental Statement 2017 has been approved.

2018-07-09 
Toscotec launches its key innovations at iT’s Tissue 2018.

Toscotec launched its latest innovations during iT’s Tissue 2018. The advanced technologies it presented at its NOWNEXT open house include : Toscotec’s S-Crescent Former and the new TADVISION® machine.

The S-Crescent is a high efficiency forming section, which significantly increases dryness before the pressing area, through optimized dewatering. The aim is to reduce the burden of water removal for the press and consequently the drying section, by boosting dewatering in the wet section of the tissue machine.

Drawing on the experience of its successful installation in the U.S. market in 2004, Toscotec entirely redesigned its TAD machine to achieve superior tissue properties, including bulk and absorbency, and outstanding results in energy consumption. The new TADVISION® ensures improved runnability and machine efficiency thanks to its unique serpentine TAD section, composed of three TAD honeycomb coated drums. A detailed Computational Fluid Dynamic analysis ensures a highly optimized airflow in the air-system ducts leading to the TAD section and Yankee hoods. Overall, TADVISION® ensures a more effective use of energy, bringing consumption down to 4.5-5.5 MWh/ton, a significant decrease compared to the consumption of current TAD machines, which is estimated in the range of 6.0-7.5 MWh/ton. Toscotec is continuing its energy reduction program and is committed to further reducing the overall consumption to less than 4.5 MWh/ton for a plant of the same production capability over the next few years.

The other advanced technologies presented at Toscotec’s NOWNEXT open house include new upgrades of Toscotec’s rewinding line, TT WIND-H and TT WIND-L, and an overview of Toscotec’s excellence in tissue drying, with TT SYD and the Yankee Hood and Air System plants. In particular, Toscotec’s rewinders feature improved performances through a newly perfected automatic web tension control, fast cycles, operator friendly automation and the automatic shaft handling system. The Energy and Environment department presented the most comprehensive range of drying configurations presently available in tissue making, designed to suit all needs and operating conditions, with state-of-the-art heat recovery technology, including up to six energy recovery stages in one single plant.

Finally, Toscotec’s YES (Your Expert Service) division launched its 24/7 service catering for customers round the clock all over the world, with a very special tool, YES – CONNECT-VISION, the new helmet enabling fully integrated communication and problem-shooting excellence.

This year visitors concluded their experience of NOWNEXT open house in the newly inaugurated canteen, a brand-new building within the expanded perimeter of Toscotec’s headquarters, which includes recreational space for employees, such as a fitness center and two lounges.

2018-07-09 
Ontex confirms rejection of unsolicited proposal from PAI Partners SAS

Ontex Group NV notes the recent press speculation and confirms that it received an unsolicited and non-binding proposal from PAI Partners SAS  relating to a possible cash offer for the outstanding shares in Ontex.

Having reviewed the proposal, the Ontex board of directors has unanimously rejected it on the basis that it significantly undervalued the Company. The Ontex board of directors confirms its full confidence in the strategy being executed by the management team to deliver long-term value for Ontex shareholders.

As disclosed in Ontex’s annual report, Ontex’s CEO, Mr. Charles Bouaziz, serves on the supervisory board of PAI. As a result the board has not involved Mr. Bouaziz in discussions about the merits of PAI’s proposal. He has also recused himself from his position at PAI for as long as is appropriate.

2018-07-06 
Teknosavo renewed ChipSmart™ 3D - The only automated and real-time wood chip surveillance

Teknosavo has renewed the ChipSmart™ 3D chip quality surveillance device by expanding its analysis range. Fully automated analysis can be connected to the WoodSmart™ debarking optimization system, enabling real-time chip quality evaluation. With new features, the quality of wood as raw material and its potential can be optimized to the peak.

State of the art -technology to analyze chips in real time
The ChipSmart™ unit combines highly accurate camera optics and a comprehensive analysis software that applies artificial intelligence. The automatic sampler captures the chip sample from the main stream, after which the device analyzes its quality. Also manual samples can be analyzed any time when the equipment is running. The versatile ChipSmart 3D analysis tells a lot about chips - their individual dimensions, SCAN-CM 40 standard size distribution and thickness, length and width, bark and moisture content, as well as the ISO-brightness of the chips. In addition, as a new feature, the device recognizes the direction of wood fibers and quality of cutting edges of chips. The data is directed to the WoodSmart™ optimization system, which compiles real-time information of the total wood debarking and chipping process.

Controlling leads to better end products and productivity
The information from the chip analysis can help quality control in many ways. The WoodSmart™ optimization system combined with chip analysis can be used to monitoring e.g. trend of pin chips and fines, amount of accept and direct quality of cutting edge of chip. Direct chip quality monitoring indicates condition of chipper blades and counter blades. With online information, wood loss can be reduced while the need for manual work also decreases. Also, the quantity of chemicals needed for pulping process can be optimized when chip properties are known in advance. The homogeneous process provides direct savings of raw material, chemicals, energy and labor costs.

"The quality of wood delivered as raw material also has greater importance to the whole process. Fresh and healthy wood is the best raw material, that can be utilized maximally by using optimized process. It is clear that our customers will be able to get more power from quality control and improve the quality of chips with the renewed ChipSmart™", says Teknosavo’s CEO Hannu Hämäläinen.

ChipSmart™ can be installed on both new and existing barking lines. The device is always implemented to suit the needs and process of the customer.

2018-07-06 
ANDRITZ pulp drying plant achieves new world record at UPM’s Kymi mill, Finland

The ANDRITZ pulp drying plant installed at UPM’s Kymi mill in Kouvola, Finland, achieved a new record production capacity of 2,452 tons per day on May 31, 2018. In terms of specific drying capacity, this equals 389.2 tons per day and meter of working width on the 6.3 meter wide sheet drying machine, which is a new world record for drying of bleached birch and pine kraft. The mill was started up successfully in 2015 and has achieved several production records since then.

The ANDRITZ high-capacity pulp drying line enables efficient and very quick switches between birch and pine pulp production within less than 23 minutes and handles the wide production range of 1,550°to 2,452 tons per day perfectly.

ANDRITZ high-capacity pulp drying lines feature :
• Highest capacities at highest operational reliability for any pulp grade thanks to proven pulp drying technology, including the ANDRITZ Twin Wire Former and shoe press equipment.
• Maximum production flexibility and adaptability for large production windows and short grade changing times.
• Stable operation and low maintenance due to high degree of automation.

This impressive production record is the result of ANDRITZ’s leading and proven pulp drying technology and of the excellent cooperation and partnership with UPM.

UPM Kymi is one of the world’s most efficient producers of softwood and birch pulp and is recognized worldwide for its high-quality products and excellent customer service, which makes the company a benchmark producer in Europe.

2018-07-06 
IBC Paper Training has launched, with success, its new concept of web series

IBC Paper Training has launched, with success, its new concept of web series last Thursday by organizing a webinar LIVE about energy Optimization. More than 70 papermakers worldwide were present on the platform listening and asking questions for 1,5h. This new concept consists to give the opportunity to deepen your knowledge and innovate about Pulp & Paper Process Optimization. Every last Thursday of the month you’ll be able to assist LIVE to a webinar about various subjects such as Industry 4.0, Energy Optimization, Water Management, Felt conditioning, Maintenance via vibrations… Next to this, streaming of all the LIVE sessions and past are available any time. For more detail visit our web site : https://www.ibcpapertraining.com/webseries/

2018-07-06 

Copyright © 2013 PaperFirst by groupenp.com. All rights reserved. Markets covered: France – Belgium – Switzerland - Spain – Portugal – Turkey - North Africa – Middle East – Latin America – And beyond…

Content Disclaimer - Legal - Data protection charter - Cookies - developed by Atmedia Communication